總述

Summary

滾邊機是采用除去輪輞成型模樣之后生的輪輞邊沿毛刺發生的全自主的準備，以冷滾壓的體例關閉程序修緣至油滑過分的，完成目標提升輪輞個人品德的請求。該準備能工作各長寬高小線輪輞，工作人數廣，準備全體人員精密度較高，包容全自主的化體系中，目標追溯力高，分布干硬。Roll edge machine is used to remove the burr of rim both edge after rim roll forming, adopt cold rolling way to process the rim edge upto smooth, to achieve the requirements of improving the rim quality. The equipment can process the size at diameter 13-17 inch of car rim line, this machine use fully automated system with high efficiency, compact structure.

規格參數

Specification

技能規格型號	Model Number	GBJ-350
輪輞比較大大小	Max. Width of Rim Band	290mm
輪輞極限半徑	Max. Diameter of Rim Band	18 inches
輪輞最高口徑	Mini. Diameter of Rim Band	13 inches
輪輞較大薄厚	Max. Thickness of Rim Band	5mm
偏側較大 滾邊力	Rolling Force of Single Side	1.7Tons
收縮氣息	Pressure of Compressed Air	0.4-0.6Mpa
一側滾珠可以調整劑間距	Adjustable Distance of Single Si de Roller	150mm
滾邊輪帶速	Roller Speed	230r/min

特點

1) 旋轉英式Running Process

投料→滑輪積極下壓→扭曲→消弭刀痕→滑輪掌握→打料→打料裝配返航→下料機承辦一工件表面積極進到。

全都裝備主動的化水平方向高，合理布局疏松，級任務法律效力高。

feed material→ roller wheel press down automatically→ rotation→ remove burr→ roller wheel releases→ material unload→ unloading device goes down→ prepare unloading→ workpiece enters automatically.The equipment has high automatically production level, intensive structure, and high working efficient.

2) 配置全及時化，取得成效進行體例上面有單動調控、清理調控和及時調控的功能。

史詩裝備具體措施語言表達由PLC有節制，平靜靠受得了

The equipment is full automatically, whose operation mode has single operation, manual and auto operation.

Its operation logic is controlled by PLC.

3) 支配界面顯示（HMI）妙手動填寫代加工各種類型號鋼圈的調濟后基本參數并存儲，以便隨意挪用公款，能夠 或者是馬太效應武器裝備內外旌旗燈號的快速設置的現象和實時路況的現象。

On operating interface (HMI) can input adjusted parameter of every rim size manually and record them to call parameter instantly. It also shows the set condition of equipment’s external signal and its current condition.

4) 收入支出表料清算通道屏幕寬度匹配、壓緊輪特別、擋料實力地位、下滾模滾邊傾斜角等任何主要參數可重視差距技術參數的鋼圈止住食補。

The working parameters, like width of loading/unloading path, pressing wheel’s height, material baffle position, roll-edge dip angle of lower rolling tool, can be adjusted according with different rim specifications.

5) 防具列席布置圖不便靠經經得住，抗振可以好；必備條件充裕的靠經經得住性,在期刻日內有充裕的承載力、剛度系數、不便性、耐破壞性、抗委靡性。

Equipment’s over-all structure is stable and reliable with excellent shakeproof ability. It is reliable enough to keep sufficient strength, rigidity, stability, corrosion resistance, fatigue resistance.

6) 雙旋輥架（擺設）氣壓可控，鉆速120~200轉/分，上輥軸氣動系統壓緊，氣壓可控4-8kg/cm2，收入支出料架尺寸可控6"-16.5"，任何車程合理、身份合理、有沒得什么有鋼件突顯均采納雙位無接點感到孤獨突顯，做的突顯滿有找準。

缺件，靈動日常運轉時各生產多種工序都顯露綠燈，有病癥時某生產多種工序顯露指示燈并短信報警響鈴顯露，無誤實時監控防范。在改換代謝物時，只是改換下模塑模，和專業專業調劑鋸齒輥的想法，專業專業調劑階段為6分鐘。

The pressure of double rotation roller rack can be adjusted. Its rotation speed is 120~200r/min. Pressure adjustable range is 4-8kg/cm2 (0.4-0.8Mpa) for pneumatic clamping of upper material pressing roller. Width of material loading/unloading path adjustable range is 6"-16.5". All the stroke control, position control, workpiece display adopt two-position noncontacting sensor vision.

In situation when without workpiece or safe running green indicator lights. When fault occurs, some process will light red indicator and alarm to dial with problems. It just need to change lower tool and adjust angle of deburr roller when change products. The adjustment time is 4 minutes.